Tripp Lite B140-1P0-WP-1 Uživatelský manuál

1Owner’s Manual1111 W. 35th Street, Chicago, IL 60609 USAwww.tripplite.com/supportCopyright © 2011 Tripp Lite. All rights reserved.DVI over Cat5 Exten

10Standard Extender Kit Installation3 B140-1A1-WP only: Connect the external power supply to the local unit and plug it into a Trip Lite Surge Suppres

DVI SOURCEB140-1A1-WP LOCALTRANSMITTERB140-1A1-WP REMOTERECEIVERB140-110REMOTEREPEATERB140-110REMOTEREPEATERB140-110REMOTEREPEATERUp to 175 ft. at 102

124 UsingCat5e/6cable,connecttheRJ45portonthelocalunittotheRJ45INPUTportontheB140-110remote/repeaterunit.5 Connect a monitor to th

1311 UsingCat5e/6cable,connecttheRJ45OUTPUTportonthelastremote/repeaterunittotheRJ45INPUTportoftheB140-101XorB140-1A1-WP remote

B140-004B140-1A0B140-1P0B140-1A0-WP-1Up to 200 ft. at 1024 x 768 (60Hz)Up to 150 ft. at 1920 x 1080 (60Hz)Up to 100 ft. at 1024 x 768 (60Hz)Up to 50 f

15Standard Extender/Splitter Installation1 Make sure the DVI source is powered OFF.2 Connect the DVI source to the DVI port on the B140-002 or B140-0

169 ConnecttheB140-1P0DVI-DSingle-Linkconnectortothemonitor;or, connect the B140-1P0-WP-1, B140-1A0 or B140-1A0-WP-1 to themonitorusingaT

OPTIONAL LOCALMONITORB140-004 LOCALTRANSMITTERB140-110 REMOTE/REPEATERB140-110 REMOTE/REPEATERB140-110 REMOTE/REPEATERUp to 175 ft. at 1024 x 768 (60H

18Extender/Splitter with Remote/Repeater Installation (B140-1A0 and B140-1A0-WP-1 remote receiver units only)2 ConnecttheDVIsourcetotheINPUTpor

19Extender/Splitter with Remote/Repeater Installation (B140-1A0 and B140-1A0-WP-1 remote receiver units only)10 Connect the external power supply to t

2Package ContentsProduct FeaturesB140-101B140-1P1-WP-1B140-101XB140-1A1-WPB140-002B140-004B140-1A0B140-1A0-WP-1B140-1P0B140-1P0-WP-1B140-110Local Unit

Level 1Level 2Level 3OPTIONAL LOCALMONITORB140-1P0 — Up to 100 ft. at 1024 x 768 (60 Hz), or up to 50 ft. at 1920 x 1080 (60 Hz)B140-1P0-WP-1 — Up to

21Extender/Splitter Daisy-Chain Installation1 Make sure the DVI source is powered OFF.2 Connect the DVI source to the DVI port on the B140-004 labeled

22Extender/Splitter Daisy-Chain Installation12 ConnecttheB140-1P0DVI-DSingle-LinkConnectortothemonitor;or, connect the B140-1P0-WP-1, B140-1A

OPTIONAL LOCALMONITORB140-004 LOCALTRANSMITTERB140-110 REMOTE/REPEATERB140-110 REMOTE/REPEATERB140-110 REMOTE/REPEATERUp to 175 ft. at 1024 x 768 (60H

24Extender/Splitter Daisy-Chain with Remote/Repeater Installation (B140-004 extender/splitter, and B140-1A0 and B140-1A0-WP remote receivers only)1 M

25Extender/Splitter Daisy-Chain with Remote/Repeater Installation (B140-004 extender/splitter, and B140-1A0 and B140-1A0-WP remote receivers only)Up

2618 Repeatsteps8through17foreachadditionalRJ45outputportonthe local transmitter units.19 TurnonthepowertotheDVIsource.TheOrange

27Warranty & Warranty Registration1-Year Limited WarrantyTRIPP LITE warrants its products to be free from defects in materials and workmanship for

281111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support201110026•933094201110026-93-3094-EN.indd 28 11/3/2011 11:37:17 AM

3Product FeaturesB140-1P1-WP-1• DVIoverCat5PassiveExtenderWallplateKit• Extenda1024x768(60Hz)signalupto75ft.fromthesource,ora1

4Product FeaturesB140-002• 2-PortDVIoverCat5Extender/SplitterLocalTransmitterUnit (Box-style)• SplitsaDVI-DSingle-Linksignalinto2sepa

5Product FeaturesB140-1A0• DVIoverCat5ActiveExtenderRemoteReceiverUnit(Box-style)• WorkswithB140-002andB140-004extender/splitterstoex

6Product FeaturesB140-1P0-WP-1• DVIoverCat5PassiveExtenderWallplate• WorkswithB140-002andB140-004extender/splitterstoextenda1024x768

7Product FeaturesOptional Accessories:• B132-004-RB1URackmountBracket• N202-SeriesCat624AWG,solidwirepatchcables• P561-SeriesDVI-DSingl

8Mounting (Optional) The B140-101X, B140-002, B140-004, B140-1A0 and B140-110 come with mounting hardware that allows them to be mounted in a variety

TO DVI SOURCERJ45 JACKCat5/5e/6PATCH CABLELOCAL UNITPOWERJACKREMOTE UNITTO DVI MONITORB140-101 — Up to 100 ft. at 1024 x 768 (60 Hz), or up to 50 ft.