Tripp Lite B130-101A-2 Uživatelský manuál

1Owner’s ManualVGA Over Cat5 Extenders and Extender/SplittersExtender Kit Models: B130-101-2, B130-101A-2, B130-101-WP-1, B130-101A-WP-2, B130-101S-

10Optional Accessories• B132-004-RB 1U Rackmount Bracket• N022-01K-GY Gray Cat5e Bulk 24 AWG Solid Cable – 1,000 ft.• N030-010 10-pack of RJ45 Plug

11Mounting Hardware InstructionsAll of the non-wallplate VGA extender products come with mounting hardware that allows them to be mounted in a variety

12InstallationEDID CopyCompatibility issues can occur when EDID information is not properly communicated between the source and the display. Select mo

133 Connect the external power supply to the transmitter unit and plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninter

14Extender Kit Installation (B130-101-2, B130-101A-2, B130-101-WP-1, B130-101A-WP-2, B130-101S-2, B130-101-U)Note:1. For models that support EDID cop

15Installation continued1 Make sure that the VGA, audio* and RS-232 serial* source is powered off.2 (B130-101-2, B130-101A-2 and B130-101S-2 only) – C

16Installation continued10 Connect a monitor and speakers* to the OUTPUT ports on the receiver unit using a VGA and audio* cable.11 (B130-101S-2 only)

17Installation continuedNon-Kit Standard InstallationNote:1. For models that support EDID copy, perform the EDID copy procedure described in this manu

181 Make sure that the VGA and audio* source is powered off.2 Connect the VGA and audio* source to the INPUT port(s) on the transmitter unit using a V

19Installation continuedNon-Kit Daisy Chain Installation (B132-004-2 and B132-004A-2 only)Note:1. For models that support EDID copy, perform the EDID

2Table of ContentsPackage Contents 3Product Features 4All 4B130-101-2 4B130-101A-2 4B130-101-WP-1 4B130-101A-WP-2 5B130-101S-2 5B130-111 5B130-111

201 Make sure that the VGA and audio* source is powered off.2 Connect the VGA and audio* source to the INPUT port(s) on the transmitter unit using a V

21Installation continuedExtender/Repeater Kit Installation (B130-101-2, B130-101A-2, B130-101-WP-1, B130-101A-WP-2, B130-111 and B130-111A)Note:1. For

22Installation continued5. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6 cable must be used. The use of stranded wire Cat5e/6

23Installation continuedIf you are not connecting additional remote repeater units, proceed to step 11 to complete the chain with a receiver unit.8 Us

24Installation continuedNon-Kit Remote Repeater Installation*If this is a feature of your extender kit.Note:1. For models that support EDID copy, perf

25Installation continued5. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6 cable must be used. The use of stranded wire Cat5e/6

26Installation continued8 Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the first remote repeater unit to the RJ45 INPUT port on a second remote

27Non-Kit Daisy Chain Remote Repeater Installation(B132-004A-2 and B132-004-2 only)Installation continuedNote:1. For models that support EDID copy, pe

28Installation continued*If this is a feature of your extender kit.2. The diagram shows a B132-004-2 installation with the maximum number of remote u

29Installation continued5 Connect the external power supply to the first transmitter unit in the installation, and then plug it into a Tripp Lite Surge

3Package ContentsB130-101-2B130-101A-2B130-101-WP-1B130-101A-WP-2B130-101S-2B130-111B130-111AB130-101-UB132-002-2B132-002A-2B132-004-2B132-004A-2B132-

30Installation continued12 Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the last remote repeater unit to the RJ45 INPUT port on a receiver uni

31TroubleshootingIf you are unable to get an acceptable image after following the installation instructions, try the troubleshooting tips below.1. Ar

32Troubleshooting continued7. What resolution are you trying to reach? Tripp Lite’s VGA over Cat5 extenders are tested to support up to 1920 x 1440 @

33Troubleshooting continued11. Do you have any patch panels or other devices in between the transmitter, repeater and receiver units? Tripp Lite’s VGA

34Warranty and Product Registration 1-Year Limited WarrantyTRIPP LITE warrants its products to be free from defects in materials and workmanship for a

35WARNINGUse of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the lif

361111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support14-11-071 • 93-33F9_revA14-11-071-9333F9.indd 36 11/20/2014 4:42:47 PM

4Product FeaturesAll• Support a maximum resolution of 1920 x 1440 @ 60 Hz.• All operating systems supported.• Plug and play; no software or drivers re

5B130-101A-WP-2• Extends both a VGA video (1024 x 768 @ 60 Hz) and an audio signal up to 1,000 ft. from the source.• Includes a VGA + audio splitter c

6Product Features continuedB130-111A• Kit comes with both local transmitter and remote repeater units.• Locate multiple monitors/speakers at different

7Product Features continuedB132-002-2• Works with the B132-100-1 and B132-100-WP-1 remote units to extend a VGA video signal (1024 x 768 @ 60 Hz) up t

8Product Features continuedB132-004A-2• Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA video (1024 x 768 @ 60 Hz) and a

9Product Features continuedB132-110• Both extends and expands your Tripp Lite VGA over Cat5 installation, allowing you to locate multiple monitors at